MAG 8000 for irrigation applications (7ME6880)

• Adaptor for conduit installation to provide a clean, protected pathway for device cables

Technical specifications

Meter  Accuracy  - ± 0.8 % ± 2.5 mm/s
           - ± 0.4 % ± 2.5 mm/s
           - NMI (class 2.5)
 Low flow cut-off (default) - 1.0 %
 Media conductivity - Clean water > 20 ?s/cm
Temperature
 Ambient   - -20 ... +60 °C (-4 ... +140 °F)
 Media     - 0 ... 70 °C (32 ... 158 °F)
 Storage   - -40 ... +70 °C (-40 ... +158 °F)
Enclosure rating
 Remote sensor   - IP68 to EN 60529/NEMA 6P, 10 mH2O cont.
 Compact version - IP68 to EN 60529/NEMA 6P, 3 mH2O for six months
Approvals
 Drinking water approvals • ANSI/NSF 611) (cold water) USA
                          • WRAS (BS 6920 cold water) UK
 Custody transfer approval - NMI M 10 Australia (DN 50 to DN 1200)
 Sensor material   - Carbon steel ASTM A 105, with corrosion resistant two-component epoxy coating (150 ?m/300 ?m) Corrosivity
                     category C4, according to ISO 12944-2
 Conformity  - IEC/EN 61326
Flanges
 EN 1092-1 (DIN 2501) PN 10 drilled pattern  - DN 50 ... 600 (2" ... 24") (max. pressure 7 bar (101.5 psi))
 ANSI 16.5 Class 150 drilled pattern  - 2" ... 24" (max. pressure 7 bar (101.5 psi))
 AS 2091-1 Table D drilled pattern   - DN 50 ... 600 (2" ... 24") (max. pressure 7 bar (101.5 psi))
 AS 2129 Table E                    - DN 25, DN 40, DN 125 (1", 11", 5")
 AS 4087 PN 16                     - DN 50 ... DN 1200 (2" ... 48")
Excitation frequency
 Battery-powered   - DN 50 … 600 (2” … 24”): 1/15 Hz
                   - DN 700 … 1200 (28” … 48”): 1/60 Hz
 Mains-powered     - DN 50 … 600 (2” … 24”): 3.125 Hz
                   - DN 700 … 1200 (28” … 48”): 1.5625 Hz
 Liner  - Ebonite
 Electrodes  - Stainless steel AISI 316Ti/1.4571